Features:

	Rugged, 100% Machined Anodized Aluminum Construction
	Complete Standard Range From 1/8” to 3” Line Sizes
	Remove 99.99% Of Oil, Water, & Solids From Compressed Air & Other Gases
	High Efficiency Microfiber Elements
	Capture Dirt, Coalesce Liquids
	Low Cost, Long Life

Applications:

PRINCIPLE SPECIFICATIONS
Housing Model	360		360F		360A		360AF
Housing Model with Indicator	360I		360FI		360AI		360AFI
Headline Part Number	360	365	360F	365F	360A	365A	360AF	365AF
Port Size (NPT)	1/4"	1/2"	1/4"	1/2"	1/4"	1/2"	1/4"	1/2"
Drain Type (NPT)	Twist		Automatic		Petcock		Automatic
Maximum Pressure (psig) (1)	150		150		500⁽¹⁾		250
Maximum Temperature (°F)	120		120		240		240
Internal Volume (cc)	150		130		165		145
Principle Dimensions: (inches) (2)
Center of Port To Head	0.61		0.61		0.61		0.61
Head Diameter	2.74		2.74		2.74		2.74
Overall Length	6.38		6.89		6.38		6.89
Element Removal Clearance	2.74		2.74		2.74		2.74
Filter Element Codes: (3)
Disposable Element	25-64-°		25-64-°		25-64-°		25-64-°
Stainless Steel Element	SS-25-64-°		SS-25-64-°		SS-25-64-°		SS-25-64-°
PEL Element	PEL-25-64-°		PEL-25-64-°		PEL-25-64-°		PEL-25-64-°
PTFE Element	PT-25-64-°		PT-25-64-°		PT-25-64-°		PT-25-64-°
Materials of Construction: (4)
Head	AL		AL		AL		AL
Bowl	PC		PC		AL		AL
Internals	Nylon		Nylon		Nylon		Nylon
O-Rings (Standard)	Buna-N		Buna-N		Buna-N		Buna-N
Drain	Nylon		Plastic / Brass		Brass		Plastic / Brass
Accessories:
Mounting Bracket (5)	MBSS360		MBSS360		MBSS360		MBSS360
Buna-N Seal Set (Standard)	BN360		BN360		BN360		BN360
EPDM Seal Set	GE360		GE360		GE360		GE360
Kalrez Seal Set	KZ360		KZ360		KZ360		KZ360
Viton Seal Set	GV360		GV360		GV360		GV360
DPI Replacement Kit	DPI300		DPI300		DPI300		DPI300
FLOW RATES IN SCFM FOR ABOVE ASSEMBLIES WITH GRADE 50C ⁽⁶⁾ / OR 70C ⁽⁷⁾
Air Line Pressure (PSIG)	360 Series				360A Series
	50C		70C		50C		70C
2	3		6		3		6
15	6		11		6		11
30	8		16		8		16
60	13		26		13		26
100	21		44		21		44
150	29		58		29		58
200	-		-		42		88
250	-		-		45		89

Notes:
(1) Aluminum housings with an Indicator has a maximum pressure of 250 psig

(2) Dimensions are based on housing and does not include measurement for indicator

(3) Replace ‘°’ with grade required, e.g. 25-64-70C, SS-25-64-25

(4) Material abbreviations, AL = Aluminum, PC = Polycarbonate

(5) Add an "I" to the mounting bracket part number for all Indicator Housings

(6) Flow rates for Grade 50C rated at 99.99% against 0.01 micron

(7) Flow rates for Grade 70C rated at 95% against 0.01 micron


		© 2013 United Filtration Systems 6558 Diplomat Drive Sterling Heights, MI 48314 T: (586) 802-5561 F: (586) 802-5562 Toll-Free: (800)311-5561
Aluminum – Compressed Air & Gas Filters Stainless Steel Filter Elements Membrane Separators High Pressure – Up to 20,000 PSIG Disposable In-Line Filters & Adsorbers Fast Loop Filter Housings Plastic Filter Housings Liquid Filters & Elements Emissions CNG Petrochemical NGV (Natural Gas Vehicle) Filter Regulators PTFE Housings Cross Reference Charts Carbon Steel & Brass Housings Vacuum Pump Steam Filters	Contact Us / RFQ Email Directory About United Filtration Filter Blog Industrial Applications Secure Order Form Become A Distributor