Features:

	Rugged, 100% Machined Anodized Aluminum Construction
	Complete Standard Range From 1/8” to 3” Line Sizes
	Remove 99.99% Of Oil, Water, & Solids From Compressed Air & Other Gases
	High Efficiency Microfiber Elements
	Capture Dirt, Coalesce Liquids
	Low Cost, Long Life

Applications:

	Mainline Pre-filter on Air Systems
	Ideal High Volume Particulate Filter
	Desiccant Dryer Post Filters

Related Products:

	315 Series – 1/8” or 1/4”
	360 Series – 1/4” or 1/2”
	370 Series – 1/4” or 1/2”
	380 Series – 3/4” or 1”
	385 / 390 Series – 1 1/2” or 2”

ALUMINUM FILTER ASSEMBLIES

PRINCIPLE SPECIFICATIONS
Housing Model	395A	395AF
Housing Model with Indicator	395AI	395AFI
Headline Part Number	395A	395AF
Port Size (NPT)	3"	3"
Drain Type (NPT)	Petcock	Automatic
Maximum Pressure (psig)	250	250
Maximum Temperature (°F)	120	120
Internal Volume (cc)	7055	7035
Principle Dimensions: (inches) (1)
Center of Port To Head	2.56	2.56
Head Diameter	7.48	7.48
Overall Length	42.32	42.32
Element Removal Clearance	30.31	30.31
Filter Element Codes: (2)
Disposable Element	63-762-□	63-762-□
Stainless Steel Element	SS-63-762-□	SS-63-762-□
PEL Element	PEL-63-762-□	PEL-63-762-□
PTFE Element	PT-63-762-□	PT-63-762-□
Pleated (For Particulate)	63-762-□PL	63-762-□PL
Materials of Construction: (3)
Head	AL	AL
Bowl	AL	AL
Internals	SS / AL	SS / AL
O-Rings (Standard)	Buna-N	Buna-N
Drain	Brass	Plastic / Brass
Accessories:
Mounting Bracket	MB395	MB395
Buna-N Seal Set (Standard)	BN395	BN395
EPDM Seal Set	GE395	GE395
Kalrez Seal Set	KZ395	KZ395
Viton Seal Set	GV395	GV395
DPI Replacement Kit	DPI300	DPI300
FLOW RATES IN SCFM FOR ABOVE ASSEMBLIES WITH GRADE 50C ⁽⁴⁾ / OR 70C ⁽⁵⁾
Air Line Pressure (PSIG)	395A Series
	50C	70C
2	70	99
15	128	174
30	308	267
60	319	441
100	511	708
150	708	975
200	1022	1416
250	1091	1508

Notes:
(1) Dimensions are based on housing and does not include measurement for indicator
(2) Replace ‘□’ with grade required, e.g. 63-762-70C, SS-63-762-25, 63-762-50PL
(3) Material abbreviations, AL = Aluminum, SS = Stainless Steel
(4) Flow rates for Grade 50C rated at 99.99% against 0.01 micron
(5) Flow rates for Grade 70C rated at 95% against 0.01 micron