© 2008 United Filtration Systems, Inc. 6558 Diplomat Drive, Sterling Heights, MI 48314
T: (586) 802-5561 F: (586) 802-5562
|
|
 1500 PSIG STAINLESS STEEL HOUSINGS |
||||||
| Our Microfiber disposable filter elements are manufactured from precise mixtures of borosilicate glass microfibers to the very highest standards. These elements offer exceptional filtration efficiency at very low-pressure drops and being +90% void volume give very long service life.
The elements are bonded to impart high strength and eliminate fiber shedding. The choice between the different binders available will depend upon the application. Each type of element is available in a wide range of efficiencies covering the complete range from coarse bulk contamination removal (grade 80) to essentially complete removal of sub-micron contaminates. |
|||||||
|
|||||||
PRINCIPLE SPECIFICATIONS Housing Model w/
Drain 130 132 140 142 150 151 152 160 161 162 Housing Model w/o Drain Housing Model w/ Glass Bowl Port Size
(NPT) Drain
Type (NPT) Maximum
Pressure (psig) Max.
Temp. – Viton (400°F) Max.
Temp. – PTFE (400°F) Max.
Temp. – Kalrez (600°F) 134 N/A 1/4” 1/4” 1500 GV130 GP130S KZ130 136 N/A 1/2” 1/4” 1500 GV130 GP130S KZ130 144 N/A 1/4” 1/4" 1500 GV130 GP130S KZ130 146 N/A 1/2” 1/4" 1500 GV130 GP130S KZ130 N/A N/A 1” 1/4” 1500 GV150 GP150S KZ150 N/A N/A 1 1/2” 1/4” 1500 GV150 GP150S KZ150 N/A N/A 2” 1/4” 1500 GV150 GP150S KZ150 N/A N/A 1” 1/4” 1500 GV150 GP150S KZ150 N/A N/A 1 1/2” 1/4” 1500 GV150 GP150S KZ150 N/A N/A 2” 1/4” 1500 GV150 GP150S KZ150 Principle
Dimensions: (inches) Head
Diameter Overall
Length Element Removal
Clearance 0.59 2.36 4.80 2.95 0.59 2.36 4.80 2.95 0.59 2.36 9.29 7.40 0.59 2.36 9.29 7.40 1.50 4.52 14.75 9.05 1.85 4.52 15.58 9.05 1.85 4.52 15.58 9.05 1.50 4.52 24.50 17.87 1.85 4.52 25.12 17.87 1.85 4.52 25.12 17.87 Mounting
Holes <----------------M6
x 1/2” Deep on 1 1/2” centers-----------------------> <-------------------------------- M10 x
5/8” on 2½” Centers ------------------------------> Filter
Element Codes: (1) Disposable
Element Stainless
Steel Element PEL
Element PTFE
Element 25-64-□ SS-25-64-□ PEL-25-64-□ PT-25-64-□ 25-64-□ SS-25-64-□ PEL-25-64-□ PT-25-64-□ 25-178-□ SS-25-178-□ PEL-25-178-□ PT-25-178-□ 25-178-□ SS-25-178-□ PEL-25-178-□ PT-25-178-□ 51-230-□ SS-51-230-□ PEL-51-230-□ PT-51-230-□ 51-230-□ SS-51-230-□ PEL-51-230-□ PT-51-230-□ 51-230-□ SS-51-230-□ PEL-51-230-□ PT-51-230-□ 51-476-□ SS-51-476-□ PEL-51-476-□ PT-51-476-□ 51-476-□ SS-51-476-□ PEL-51-476-□ PT-51-476-□ 51-476-□ SS-51-476-□ PEL-51-476-□ PT-51-476-□ Materials
Of Construction: (2) Head,
Internals & Bowl Seals 316LSS Viton 316LSS Viton 316LSS Viton 316LSS Viton 316LSS Viton 316LSS Viton 316LSS Viton 316LSS Viton 316LSS Viton 316LSS Viton Accessories: Support
Core Mounting
Bracket SC130 MBSS130 SC130 MBSS130 SC140 MBSS130 SC140 MBSS130 SC150 MBSS150 SC150 MBSS150 SC150 MBSS150 SC160 MBSS150 SC160 MBSS150 SC160 MBSS150 Housing Model w/ PTFE Seals 130S 132S 140S 142S N/A N/A N/A N/A N/A N/A Internal
Volume (cc) 110 110 265 265 1500 1500 1500 2700 2700 2700 Notes: (1) Replace
“□” with grade required, e.g. 25-64-70C, SS-25-178-25, PT-25-64-10 (2) Material
abbreviations: 316LSS=316L Stainless Steel (3) All glass bowl “G” versions have a maximum pressure of 100 psig FLOW RATE
IN SCFM FOR ABOVE ASSEMBLIES WITH GRADE 50C / 70C
(1) Air Line Pressure (PSIG) 130 Series 140 Series 150 Series 160 Series 50C 70C 50C 70C 50C 70C 50C 70C 2 3 6 6 12 23 48 38 55 15 6 11 10 19 41 87 70 100 30 8 15 15 28 61 127 147 213 60 13 24 27 54 102 218 176 255 80 16 38 34 67 132 277 228 330 100 21 52 43 84 166 345 281 420 150 29 53 65 130 230 473 390 585 200 37 70 82 173 290 610 495 750 250 45 93 98 215 350 733 600 960 Note: (1) Flow rates for Grade 50C rated at 99.99% against
0.01 micron / Flow rates for Grade 70C
rated at 95% against 0.01 micron.