Features:

Pallflex PM Filters
Meets Heavy Duty Emissions Standards
Pall Teflo For Certification PM Sampling
Ideal For Ambient PM Sampling

Applications:

Diesel Engine Testing
Heavy Duty Engine Testing
EPA Compliance


Related Products:

Filters For Emission Service
Disposable Thimble
Heatable Housings
Disposable In-Line Filters and Adsorbers
Nylon 770 - Emission Filters

DIESEL PARTICULATE FILTERS

This variety of product is used for stack emission control, ambient air monitoring, and diesel particulate testing where particulate is captured for compliance and certification purposes. The pure formulation of this product provides fast and accurate sampling results. Commonly referred to as “diesel particulate” or “weigh room” filters they go hand and hand with our borosilicate microfiber emission double open ended elements. We stock a wide variety of these industry standards for immediate delivery.


Diesel Certification Filters

Pall Teflo: 2.0 micron, 47mm PTFE with support ring
Whatman PM2.5: 2.0 micron, 46.2mm PTFE with support ring (Sequentially Numbered)

PRINCIPLE SPECIFICATIONS
Description Fiberfilm Filters T60A20 Emfab Filters TX40H120-WW
Filter Media Heat resistant borosilicate glass fiber coated with fluorocarbon (PTFE) Borosilicate microfibers reinforced with woven glass cloth and bonded with PTFE
Diameters Available 46.2mm, 47mm, 70mm, 90mm 46.2mm, 47mm, 70mm, 90mm
Typical Thickness 203µm (8 mils) 148µm (7 mils)
Typical Filter Weight 3.4 mg/cm2 5.0 mg/cm2
Typical Water Flow
Rated at 5 PSIG (0.35 Bar)
220 mL/min/cm2 32 mL/min/cm2
Typical Air Flow Rate
Rated at 10 PSIG (0.7 Bar)
180 L/in/cm2 68 L/in/cm2
Maximum Operating Temperature-Air 315.5°C (600°F) 260°C (500°F)
Typical Aerosol Retention 96.40% 99.9%
pH In Boiled Water Extract Not Available Not Available





Home | Compressed Air and Gas | Stainless Steel | Membrane Separators | Liquid Filters | Filter Elements | Contact Us

© 2010 United Filtration Systems, Inc. 6558 Diplomat Drive, Sterling Heights, MI 48314
T: (586) 802-5561 F: (586) 802-5562