Features:

	Completely Disposable
	Blue Transparent Nylon
	Virgin Kynar Body
	Four Sizes Available
	Five Grades Of Filtration
	Two Or Three Port Design
	Filter Gases And Liquids

Applications:

	HVAC Purification
	Analyzer And Sensor Protection
	Low Cost Scrubbers
	Last Chance Air Purifier
	Zero Air Gas Calibration
	Low Cost Scrubbers

Related Products:

	Filters For Emission Service
	Diesel Particulate Filters
	Disposable Thimble
	Heatable Housings
	Nylon 770 - Emission Filters

Features:

	Standard OEM Size
	Blue Transparent Nylon
	Virgin Kynar Body
	Filter Gases And Liquids
	Ideal For Use With Standard ź O.D. Compression Fittings

Applications:

	HVAC Purification
	Analyzer And Sensor Protection
	Low Cost Scrubbers
	Last Chance Air Purifier
	Zero Air Gas Calibration
	Low Cost Scrubbers

Features:

	Completely Disposable
	Blue Transparent Nylon
	Virgin Kynar Body
	Four Body Sizes
	Wide Range Of Adsorbents (DIA)
	No Handling Of Loose Adsorbents
	Ideal Last Chance Protection

Applications:

	HVAC Purification
	Analyzer And Sensor Protection
	Low Cost Scrubbers
	Last Chance Air Purifier
	Zero Air Gas Calibration
	Low Cost Scrubbers

DISPOSABLE INLINE FILTERS & ADSORBERS

Our Disposable In-Line Filters consists of permanently welded housings with encapsulated filter elements. This makes them ideal for portable analyzers and other analysis systems requiring a robust, easily replaceable filter. A choice of body materials makes them suitable for a wide range of chemical environments.

We also supply the DIF-BN50I, which contains a red dye that bleeds through the element to provide an accurate visual indication that liquid is present. The red dye will permeate through the element upon water and/or oil saturation. Simply order as DIF-BN50I.

DISPOSABLE INLINE FILTERS - DIF-MN ("MINI")
Mini - Part Number: DIF-MNxx
Replace "xx" with grade required 30, 40, 50, 60, 70, 80, e.g. DIF-MN50
Inlet / Outlet:	0.25"
Drain Connection	None
Maximum Pressure	125 PSIG
Volume (cc)	6
Maximum Temperature:
°F At 0 PSIG	230
°F At 100 PSIG	120
Principle Dimensions: (Inches)
Spigot Diameter	0.25
Body Diameter	1.00
Spigot Length	0.43
Overall Length	1.71
Materials of Construction:
Body	Nylon
Filter Element	K-Type
Filter Element Size	12-16-□


GAS FLOW RATES - DIF-MN□ (12-16-□) - MINI
DIF Model	Filtration Efficiency Removal Of 0.01	Gas Flow In SCFM At Stated Line Pressure In PSIG And 1.5 PSIG Pressure Drop
Number	Micron Particles	1.5	10	20	30	40	60	80	100	125
DIF-MN30	99.99998+%	0.1	0.15	0.2	0.25	0.3	0.4	0.5	0.6	0.7
DIF-MN40	99.99998+%	0.15	0.2	0.3	0.4	0.5	0.7	0.8	1.0	1.2
DIF-MN50	99.99+%	0.3	0.4	0.6	0.8	1.0	1.0	1.7	2.1	2.8
DIF-MN60	99.5+%	0.4	0.7	1.0	1.3	1.6	2.1	2.7	3.4	4.1
DIF-MN70	95.0+%	0.5	0.8	1.1	1.4	1.8	2.4	3.0	3.7	4.7
DIF-MN80	75.0+%	0.9	0.9	1.3	1.6	2.0	2.7	3.5	4.3	5.0


LIQUID FLOW RATES - (12-16-□) - MINI
DIF Model	Filtration Efficiency 98% Removal	Water Flow Rate
Number	Rating	Gallons / Hr at 1.5 PSIG Pressure Drop
DIF-MN30	0.3 micron	0.6
DIF-MN40	1 micron	1.6
DIF-MN50	2 micron	3.3
DIF-MN60	8 micron	6.5
DIF-MN70	25 micron	8.0
DIF-MN80	75 micron	8.5

Our standard DIF-BN series is by far the most commonly used size of DIF since it combines high efficiency filtration with low pressure drops in a compact package. Whether being used in an OEM cabinet, emission bench, or air monitor this little gem is an economical workhorse.
DISPOSABLE INLINE FILTERS - DIF-BN ("STANDARD")
Standard - Part Number: DIF-BNxx
Kynar Part Number: DIF-BKxx
Replace "xx" with grade required 30, 40, 50, 60, 70, 80, e.g. DIF-BN50
Inlet / Outlet:	0.25"
Drain Connection	None
Maximum Pressure	125 PSIG
Volume (cc)	11.5
Maximum Temperature:
°F At 0 PSIG	230
°F At 100 PSIG	120
Principle Dimensions: (Inches)
Spigot Diameter	0.25
Body Diameter	1.00
Spigot Length	0.79
Overall Length	3.23
Materials of Construction:
Body	Nylon / Kynar
Filter Element	K-Type
Filter Element Size	12-32-□

GAS FLOW RATES - DIF-BN□ (12-32-□) - STANDARD
DIF Model	Filtration Efficiency Removal Of 0.01	Gas Flow In SCFM At Stated Line Pressure In PSIG And 1.5 PSIG Pressure Drop
Number	Micron Particles	1.5	10	20	30	40	60	80	100	125
DIF-BN30	99.99998+%	0.2	0.3	0.4	0.5	0.6	0.8	1.0	1.3	1.5
DIF-BN40	99.99998+%	0.3	0.4	0.7	0.8	1.0	1.4	1.7	2.1	2.5
DIF-BN50	99.99+%	0.6	0.9	1.3	1.6	2.0	2.7	3.5	4.2	5.7
DIF-BN60	99.5+%	0.9	1.4	2.0	2.6	3.2	4.3	5.4	6.9	8.2
DIF-BN70	95.0+%	1.1	1.6	2.3	2.9	3.6	4.9	6.0	7.5	9.4
DIF-BN80	75.0+%	1.2	1.8	2.6	3.3	4.0	5.5	7.0	8.6	10.0

LIQUID FLOW RATES - (12-32-□) -STANDARD
DIF Model	Filtration Efficiency 98% Removal	Water Flow Rate
Number*	Rating*	Gallons / Hr at 1.5 PSIG Pressure Drop
DIF-BN30	0.3 micron	1.3
DIF-BN40	1 micron	3.2
DIF-BN50	2 micron	6.6
DIF-BN60	8 micron	13.0
DIF-BN70	25 micron	16.0
DIF-BN80	75 micron	17.0

Notes: (*) Use the same flow rates for DIF-BK

DISPOSABLE INLINE FILTERS - DIF-IN ("INTERMEDIATE")
Intermediate - Part Number: DIF-INxx
Replace "xx" with grade required 30, 40, 50, 60, 70, 80, e.g. DIF-IN50
Inlet / Outlet:	0.25"
Drain Connection	None
Maximum Pressure	100 PSIG
Volume (cc)	50
Maximum Temperature:
°F At 0 PSIG	230
°F At 100 PSIG	120
Principle Dimensions: (Inches)
Spigot Diameter	0.25
Body Diameter	1.44
Spigot Length	0.77
Overall Length	4.61
Materials of Construction:
Body	Nylon
Filter Element	K-Type
Filter Element Size	12-57-□



Intermediate Coalescer - Part Number: DIF-INxxC
Replace "xx" with grade required 30, 40, 50, 60, 70, 80, e.g. DIF-IN50C
Inlet / Outlet:	0.25"
Drain Connection	0.25"
Maximum Pressure	100 PSIG
Volume (cc)	50
Maximum Temperature:
°F At 0 PSIG	230
°F At 100 PSIG	120
Principle Dimensions: (Inches)
Spigot Diameter	0.25
Body Diameter	1.44
Spigot Length	0.77
Overall Length	4.61
Materials of Construction:
Body	Nylon
Filter Element	C-Type
Filter Element Size	12-57-□C


GAS FLOW RATES - DIF-IN□ (12-57-□) - INTERMEDIATE
DIF Model	Filtration Efficiency Removal Of 0.01	Gas Flow In SCFM At Stated Line Pressure In PSIG And 1.5 PSIG Pressure Drop
Number	Micron Particles	1.5	10	20	30	40	60	80	100
DIF-IN30	99.99998+%	0.4	0.5	0.7	0.75	0.9	1.0	1.5	2.0
DIF-IN40	99.99998+%	0.7	1.0	1.7	2.0	2.7	3.3	4.1	5.0
DIF-IN50	99.99+%	1.5	2.1	3.4	4.0	5.3	6.6	8.3	10.0
DIF-IN60	99.5+%	3.0	4.4	7.0	8.4	11.2	14.0	17.5	21.0
DIF-IN70	95.0+%	3.6	5.2	8.4	10.0	13.5	17.0	21.5	26.0
DIF-IN80	75.0+%	4.0	5.8	9.3	11.0	15.0	19.0	24.0	29.0


LIQUID FLOW RATES - (12-57-□) -INTERMEDIATE
DIF Model	Filtration Efficiency 98% Removal	Water Flow Rate
Number	Rating	Gallons / Hr at 1.5 PSIG Pressure Drop
DIF-IN30	0.3 micron	2.6
DIF-IN40	1 micron	6.4
DIF-IN50	2 micron	13.2
DIF-IN60	8 micron	26.0
DIF-IN70	25 micron	32.0
DIF-IN80	75 micron	34.0

DISPOSABLE INLINE FILTERS - DIF-LN ("LARGE")
Large - Part Number: DIF-LNxx
Kynar Part Number: DIF-LKxx
Replace "xx" with grade required 30, 40, 50, 60, 70, 80, e.g. DIF-LN50
Inlet / Outlet:	1/4" NPT
Drain Connection	None
Maximum Pressure	100 PSIG
Volume (cc)	120
Maximum Temperature:
°F At 0 PSIG	230
°F At 100 PSIG	120
Principle Dimensions: (Inches)
Spigot Diameter	0.50
Body Diameter	2.28
Spigot Length	1.05
Overall Length	5.43
Materials of Construction:
Body	Nylon / Kynar
Filter Element	K-Type
Filter Element Size	25-64-□


Large Coalescer - Part Number: DIF-LNxxC
Kynar Part Number: DIF-LKxxC
Replace "xx" with grade required 30, 40, 50, 60, 70, 80, e.g. DIF-LN50C
Inlet / Outlet:	1/4" NPT
Drain Connection	0.30"
Maximum Pressure	100 PSIG
Volume (cc)	120
Maximum Temperature:
°F At 0 PSIG	230
°F At 100 PSIG	120
Principle Dimensions: (Inches)
Spigot Diameter	0.50
Body Diameter	2.28
Spigot Length	1.05
Overall Length	5.43
Materials of Construction:
Body	Nylon / Kynar
Filter Element	C-Type
Filter Element Size	25-64-□C


Notes: (1) 1/4 MNPT (Threads) = 1/2 OD which can accommodate 1/2 ID tubing. If threads are not desired order as DIF-LN60-SlipOn
GAS FLOW RATES - DIF-LN□ (25-64-□) - LARGE
DIF Model	Filtration Efficiency Removal Of 0.01	Gas Flow In SCFM At Stated Line Pressure In PSIG And 1.5 PSIG Pressure Drop
Number	Micron Particles	1.5	10	20	30	40	60	80	100
DIF-LN30	99.99998+%	0.7	1.0	1.5	2.0	2.5	3.2	4.1	5.1
DIF-LN40	99.99998+%	1.2	1.8	2.6	3.2	4.0	5.5	7.2	8.0
DIF-LN50	99.99+%	2.4	3.6	5.1	6.3	7.9	11.0	14.0	17.0
DIF-LN60	99.5+%	3.8	5.9	8.3	10.0	13.0	17.0	22.0	26.0
DIF-LN70	95.0+%	4.3	6.4	9.3	12.0	14.0	19.0	24.0	30.0
DIF-LN80	75.0+%	4.7	6.9	10.0	13.0	16.0	22.0	27.0	34.0

LIQUID FLOW RATES - (25-64-□) -LARGE
DIF Model	Filtration Efficiency 98% Removal	Water Flow Rate
Number*	Rating*	Gallons / Hr at 1.5 PSIG Pressure Drop
DIF-LN30	0.3 micron	13.0
DIF-LN40	1 micron	26.0
DIF-LN50	2 micron	62.0
DIF-LN60	8 micron	84.0
DIF-LN70	25 micron	95.0
DIF-LN80	75 micron	118.0
Notes: (*) Use the same flow rates for DIF-BK DISPOSABLE INLINE FILTERS & ADSORBERS Our Disposable In-Line Adsorbers consist of nylon or kynar bodies filled with granular adsorption material with integral inlet and outlet filter pads. For best results, the longer the contact time, the more effective the adsorbers will be. Choose the appropriate adsorbent for your application from the list below. Our Disposable In-Line Adsorbers consist of granular adsorbent material ultrasonically welded into a see-through nylon or kynar body. Integral filter pads eliminate adsorbent migration. Four sizes are available, containing from 6cc up to 120cc of adsorbent.

DISPOSABLE INLINE ADSORBERS - DIA-MN ("MINI")
Mini - Part Number: DIA-MNxx
Replace "xx" with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS, e.g. DIA-MNCC
Inlet / Outlet:	0.25"
Drain Connection	None
Maximum Pressure	125 PSIG
Volume (cc)	6
Maximum Temperature:
°F At 0 PSIG	230
°F At 100 PSIG	120
Principle Dimensions: (Inches)
Spigot Diameter	0.25
Body Diameter	1.00
Spigot Length	0.43
Overall Length	1.71
Materials of Construction:
Body	Nylon
Adsorbent	Specify Adsorbent


GAS FLOW RATES - DIA-MN□ - MINI
DIA Model Number		Gas Flow In SCFM At Stated Line Pressure In PSIG And 1.5 PSIG Pressure Drop
		1.5	10	20	30	40	60	80	100	125
DIA-MNxx		0.3	0.4	0.6	0.8	1.0	1.3	1.7	2.1	2.8


DISPOSABLE INLINE ADSORBERS - DIA-BN ("STANDARD")
Standard - Part Number: DIA-BNxx
Kynar Part Number: DIA-BKxx
Replace "xx" with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS, e.g. DIA-BNCC
Inlet / Outlet:	0.25"
Drain Connection	None
Maximum Pressure	125 PSIG
Volume (cc)	11.5
Maximum Temperature:
°F At 0 PSIG	230
°F At 100 PSIG	120
Principle Dimensions: (Inches)
Spigot Diameter	0.25
Body Diameter	1.00
Spigot Length	0.79
Overall Length	3.23
Materials of Construction:
Body	Nylon / Kynar
Adsorbent	Specify Adsorbent


GAS FLOW RATES - DIA-BN□ - STANDARD
DIA Model Number		Gas Flow In SCFM At Stated Line Pressure In PSIG And 1.5 PSIG Pressure Drop
		1.5	10	20	30	40	60	80	100	125
DIA-BNxx		0.6	0.9	1.3	1.6	2.0	2.7	3.5	4.2	5.7
Notes: (*) Use the same flow rates for DIF-BK

DISPOSABLE INLINE ADSORBERS - DIA-IN ("INTERMEDIATE")
Intermediate - Part Number: DIA-INxx
Replace "xx" with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS, e.g. DIA-INCC
Inlet / Outlet:	0.25"
Drain Connection	None
Maximum Pressure	100 PSIG
Volume (cc)	50
Maximum Temperature:
°F At 0 PSIG	230
°F At 100 PSIG	120
Principle Dimensions: (Inches)
Spigot Diameter	0.25
Body Diameter	1.44
Spigot Length	0.77
Overall Length	4.61
Materials of Construction:
Body	Nylon
Adsorbent	Specify Adsorbent


GAS FLOW RATES - DIA-IN□ - INTERMEDIATE
DIA Model Number		Gas Flow In SCFM At Stated Line Pressure In PSIG And 1.5 PSIG Pressure Drop
		1.5	10	20	30	40	60	80	100
DIA-INxx		1.5	2.1	3.4	4.0	5.3	6.6	8.3	10.0

DISPOSABLE INLINE ADSORBERS - DIA-LN ("LARGE")
Large - Part Number: DIA-LNxx
Kynar Part Number: DIA-LKxx
Replace "xx" with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS, e.g. DIA-LNCC
Inlet / Outlet:	1/4" NPT
Drain Connection	None
Maximum Pressure	100 PSIG
Volume (cc)	120
Maximum Temperature:
°F At 0 PSIG	230
°F At 100 PSIG	120
Principle Dimensions: (Inches)
Spigot Diameter	0.50
Body Diameter	2.28
Spigot Length	1.05
Overall Length	5.43
Materials of Construction:
Body	Nylon / Kynar
Adsorbent	Specify Adsorbent
Notes: (1) 1/4 MNPT (Threads) = 1/2 OD which can accommodate 1/2 ID tubing. If threads are not desired order as DIA-LNCC-SlipOn
GAS FLOW RATES - DIA-LN□ - LARGE
DIA Model Number		Gas Flow In SCFM At Stated Line Pressure In PSIG And 1.5 PSIG Pressure Drop
		1.5	10	20	30	40	60	80	100
DIA-LNxx		2.4	3.6	5.1	6.3	7.9	11.0	14.0	17.0
Notes: (*) Use the same flow rates for DIF-LK

Adsorbent	Code	Principles
Activated Carbon	CC	Adsorption of hydrocarbons and other organic vapors. Zero Air Calibration
Molecular Sieve 4A	4A	Adsorption of CO₂, NH₃, H₂S, SO_X
Molecular Sieve 13X	13X	Adsorption of CO₂, NH₃, H₂S, SO_X, aromatics, amines
Silica Gel	SG	Adsortion of Water Vapor
Drierite Anhydrous Calcuim Sulfate	DR	Adsorption of Water Vapor

Mixed Bases	MB	Removal of acidic gases, CO₂, SO_X, NO_X, HCI
Potassium Permanganate	PP	Removal of SOX, Hg, and other acidic gases
Hopcalite	HO	Removal of CO by catalytic oxidation to CO₂
Sodium Bicarbonate	SB	Acid Neutralizer
Copper Sulfate	CS	Removal of Ammonia