Features:

	316L Stainless Steel Construction
	Specifically Designed For Hot Gas Analysis
	Bayonet Type Construction For Quick Element Change
	Integral Element Tie Rod And Retainer

Applications:

	Emission Testing
	Stack Testing
	Power Plant Analyzer Protection

Related Products:

	Filters For Emission Service
	Diesel Particulate Filters
	Disposable Thimble
	Disposable In-Line Filters and Adsorbers
	Nylon 770 - Emission Filters

HEATABLE HOUSINGS

Heatable housings are designed for hot gas analysis such as diesel exhaust and continuous emission monitoring systems. They may be used under vacuum to draw the sample or pressurized to 30 psig for blow down. We offer four basic models: H122S-TR, H130S-TR, H140S-TR, and H254S. Choose the correct housing based on the flow rate and response time.

The bayonet-type closure allows the element to be changed within seconds even at operating temperatures. An integral tie rod and retainer make element service a snap. The element is attached to the bayonet handle, thus completely removing it from the body.

PRINCIPLE SPECIFICATIONS
Side Port Housing Model	H122S-TR	H130S-TR	H140S-TR	H254S
Bottom Port Housing Model	N/A	H130-TR	H140-TR	N/A
Port Size (NPT)	1/4"	1/4"	1/4"	1/2"
Maximum Pressure (psig)	30	30	30	30
Internal Volume (cc)	55	100	240	1320
Maximum Temp. -Buna-N (250°F)	BNH122S	BNH130	BNH130	BNH254S
Maximum Temp. -EPDM (300°F)	GEH122S	GEH130	GEH130	GEH254S
Maximum Temp. -Viton (400°F)	GVH122S	GVH130	GVH130	GVH254S
Maximum Temp. -Silicone (450°F)	GSH122S	GSH130	GSH130	GSH254S
Maximum Temp. -Kalrez (600°F)	KZH122S	KZH130	KZH130	KZH254S
Principle Dimensions: (inches)
Head Diameter	1.50	2.20	2.20	3.46
Overall Length	4.72	5.19	9.68	12.99
Element Removal Clearance	4.09	4.34	8.58	11.72
Filter Element Codes: (1)
Disposable Element	12-57-□	25-64-□	25-178-□	51-254-□
Stainless Steel Element	SS-12-57-□	SS-25-64-□	SS-25-178-□	SS-51-254-□
Materials Of Construction: (2)
Body & Internals	316LSS	316LSS	316LSS	316LSS
O-Rings (Standard)	Silicone	Silicone	Silicone	Silicone
FLOW RATES IN SCFM AT STATED LINE PRESSURE WITH 1.5 PSID
Air Line Pressure (PSIG)	Model H122
	50S	60S	70S, 70S21-R	80S
1.5	1.5	3.0	3.6	4.0
15	2.7	5.5	6.5	7.7
30	4.0	8.4	10.0	11.0
	Model H130
1.5	3.0	5.2	6.2	6.8
15	5.4	9.5	11.0	11.0
30	7.8	14.0	16.0	17.0
	Model H140
1.5	5.6	6.8	7.4	8.0
15	10.0	12.0	13.0	14.0
30	14.0	18.0	19.0	21.0
	Model H254
1.5	11.8	18.1	19.1	21.0
15	21.0	32.3	34.0	37.4
30	31.5	48.5	51.0	56.1

Notes:
(1) Replace ‘□’ with grade required, e.g. 12-57-50S, SS-25-64-03
(2) Material abbreviations, 316LSS = 316L Stainless Steel