Features:

	Process Water Protection
	Low Cost – High Flows
	Accepts Standard DOE Cartridges
	Light Weight
	Ideal For Well Water Applications
	All Plastic Eliminates Corrosion

Applications:

	Drinking Water Filters
	Laboratory Water Supply Filters
	Low Pressure Process Stream Filters

Related Products:

	800 Series For Liquid Service – 1/4” to 2”
	Liquid Filter Cartridges
	Stainless Steel Pleated Cartridges

Plastic Liquid Housings

The 718 and 720 series filter housings are manufactured from a durable polypropylene or clear Styrene-Acrilonitrile (SAN). Reinforced polypropylene housings have excellent chemical resistance and are ideal for many residential, commercial, and industrial applications. Clear sumps are manufactured from a clear, FDA complaint Styrene-Acrilonitrile (SAN). They offer on-site examination of the cartridge and have excellent compatibility as well.

The Model 720BH (High Temperature / High Pressure) is made of glass reinforced nylon resin. They have a maximum temperature of 160°F at 125 PSIG.

PRINCIPLE SPECIFICATIONS
Housing Model	718	718B	720	720B
Port Size (NPT)	3/8"	3/8"	3/4"	3/4"
Maximum Pressure (PSIG)	125	125	125	125
Maximum Temperature (°F)	125	125	125	125
Maximum Flow Rate (GPM)	5	5	10	10
Principle Dimensions: (inches)
Head Diameter	4.625	4.625	5.125	5.125
Overall Length	6.875	6.875	12.25	12.25
Element Removal Clearance	5.75	5.75	10.75	10.75
Filter Element Codes: (1)
Spun Polypropylene	LE-718-□	LE-718-□	LE-720-□	LE-720-□
Pleated Element	LE-718-□PL	LE-718-□PL	LE-720-□PL	LE-720-□PL
Materials of Construction (2):
Head & Internals	Polypropylene	Polypropylene	Polypropylene	Polypropylene
Bowl	SAN	Polypropylene	SAN	Polypropylene
O-Rings (Standard)	Buna-N	Buna-N	Buna-N	Buna-N
Accessories:
Mounting Bracket	MB718	MB718	MB720	MB720
Buna-N Seal Set (Standard)	BN718	BN718	BN720	BN720
EPDM Seal Set	GE718	GE718	GE720	GE720
Kalrez Seal Set	KZ718	KZ718	KZ720	KZ720
Viton Seal Set	GV718	GV718	GV720	GV720
FLOW RATES IN GPM FOR ABOVE ASSEMBLIES WITH 25 MICRON ELEMENT
Gallons Per Minute	5	5	10	10

Notes:
(1) Replace ‘□’ with micron required, e.g. LE-718-25
(2) Material abbreviations, SAN = Styrene-Acrilonitrile